Blackweb BWB17AV004 FM Transmitter Manual

Blackweb BWB17AV004 FM Transmitter Manual BWB17AV004 Bluetooth Device Manual Blackweb BWB17AV004 Bluetooth Transmitter Manual Instructions Pairing Reset User Manual Guide

by

Blackweb BWB17AV004 FM Transmitter Manual

BWB17AV004 Bluetooth Device Manual

Blackweb BWB17AV004 Bluetooth Transmitter Manual Instructions Pairing Reset User Manual Guide

Blackwed BLUETOOTH FM TRANSMITTER
Model: BWb17AV004
PRODUCT GUIDE

Blackweb BWB17AV004 FM Transmitter Location of Controls

  1. LCD Display
  2. CH-Button
  3. CH+ Button
  4. Button
  5. Button
  6. Volume Control / Knob
  7. AUX(In) Jack
  8. Micro SD Card Slot
  9. Built-in Microphone
  10. Car Cigarette Plug
  11. USB Port (For charging the external USB Device)

Blackweb BWB17AV004 FM Transmitter Reset

How to reset Blackweb FM Transmitter

  1. Unplug the external USB Device from the USB Port. the charge will auto reset.
  2. The unit has a built- in overload overheats protector. If the output of the unit is overload or short circuit). The charger will auto shut off.

bwb17av004 bluetooth device won’t connect

Blackweb BWB17AV004 FM Transmitter OPERATION
For listening to music from your BT Device through the unit and your Car Radio, follow the steps bellow:

Blackweb BWB17AV004 FM Transmitter Pairing

How to connect Blackweb FM Transmitter

How to pair Blackweb FM Transmitter

Steps1 :Pairing the unit to your Car Radio

  1. Connect the unit to the car cigarette lighter socket as illustrated below
  2. The unit will automatically power on and the voltage of the car battery will appear on the LED display on the unit as illustrated below:
  3. A few seconds later, the following screen will appear:
  4. Turn on your Car Radio and enter the radio FM mode as usual. Search for a blank FM channel without any radio signal received For example: 107.0 MHz)
  5. Then press the CH-or CH+ Button on the unit repeatedly until the same channel frequency appear on the LED display as illustrated below( For example: 107.0MHz:

Step 2
Pair your BT(Bluetooth )Device to the unit:
In first time use or re-pairing the unit to a new BT Device, pairing it as below

  1. Power on and pair the unit to Car radio as step 1 above
  2. The BT logo on the LCD Display and the red Indicator on the volume Control/ Knob will blink
  3. Power on the external BT device and enter to BT mode
  4. The unit will start pairing to the BT device automatically. After pairing, the BT
    8 on the LCD Display and the Red Indicator on the Volume Control,
    will stop blinking. The following picture will appear on the LCD Display (XXXX on the display is the name of paired device)

LISTENING TO MUSIC THROUGH PAIRED BT DEVICE

  1. After step 1&2, now you can play the music or answer the incoming call with the paired BT Device as usual
  2. During playback
    Turn the Volume Control/ Knob on the unit to adjust volume level as
    desire( Or, use the Volume Controls on the Car Radio or paired BT Device to adjust volume level)
  3. Press the Volume Control /2 Knob to pause; press again to resume
    normal playback.
  4. Press back or front Buttons repeatedly to skip tracks.
  1. If the unit is paired to a Cell Phone and a call is incoming during an active music session. Press and release the Volume Control Knob then speak to the built-in microphone to answer the call (or, press and hold the knob approximately 1 second to reject the call When your call is complete, press the Volume Control Knob to disconnect or end the call and resume to music playback
  2. To shut off the unit, unplug the unit from car cigarette lighter socket
    Notes
    o When the external bt device searches the unit. our model number
    BWB17AV004 will appear on the display of external BT Device.
    o If while pairing you are asked for a code please try 0000″ 1234

Normal operation after paired

  1. Power on the external bt Device and enter to bt mode
  2. Power on the Car Radio and previously receiving the preset Fm frequency same as the preset of unit(For example: 107.0 MHz)
  3. Connect the unit to the car cigarette lighter socket. The LCD Display will illuminate and the BT logo X and the Red Indicator on the Volume Control/ Knob on it will blink
  4. Wait a few seconds, the unit will automatically pair to the unit. After paired, the BT logo p and the Red Indicator on the Volume Control/knob on the LCD Display will stop blinking
  5. If pairing is complete you may now play music and answer the incoming call with your external BT Device.

AUX(IN):
For listening to music from external audio Player ( such as a MP3 Player,
Discman..etc.

  1. Connect one end of the supplied audio Connection Cable to the AUX out/Line Out/Phone Jack on the external audio player
  2. Connect the other end of the cable to the aux Jack on the right of unit
  3. Play the music on the connected player as usual Make sure the volume level of the connected audio Player is turned to high level
  4. Power on the Car Radio and the unit will pair them together as previously step lay the music on the connected player as usual (Make sure the volume level of the connected audio Player is turned to high level
  5. During playback
    Use the volume Controls on the Car Radio or connected audio Player to
    adjust volume level.
    Press the Volume Control/b knob to pause press again to resume
    normal playback
  6. To shut off the unit, unplug the unit from car cigarette lighter socket

Micro SD Card

  1. Insert the Micro SD Card into the Micro SD Card Slot with contact finger face to the front as the marking on the unit and illustrated follows:
  2. Connect the unit to the car cigarette lighter socket to power on the unit. play will automatically start
  3. During playback
    Turn the Volume Control Knob on the unit to adjust volume level as
    desire ( Or, use the Volume Controls on the Car Radio or paired BT Device to adjust volume level)
    Press the Volume Control,@ Knob to pause: press again to resume
    normal playback.
  4. Press the back and front button o to skip

To shut off the unit, unplug the unit from car cigarette lighter socket.

  • Notes:
  • When Micro SD Card is inserted into the unit bt will automatically shut off.
  • Unplug the card from the unit before use BT
  • Up to 32 GB Micro SD Card the unit support to play
  • Before replacing Micro SD Card, make sure the unit is unplugged from the car
  • When inserting the Micro SD Card, make sure the direction you selected
  • correct. Never insert violently to avoid damaging the micro SD Card or the unit
  • If it doesn’t work please check if the direction is correct
  • You also need to download the desired music in mp3 format into the micro SD
  • Card before insert into the unit

AUX OUT:

If your car radio or any external audio Player) equipped AUX IN Jack. Connect the unit to your car radio or the external audio player through it and listen music from the paired bt device(or the external audio Player)as follow:

  1. Connect one end of the supplied audio Connection Cable to the aux in Jack on your car radio (or the external audio player)
  2. Connect the other end of the cable to the AUX Jack on the right of unit
  3. Power on the external bt device and enter to bt mode
  4. Power on the Car Radio or the external audio player and set the input source to AUX IN mode
  5. Pair the external bt device to the unit and play the music on it or play the
    music on the Micro SD Card) as previously instructed

During Playback

  • Turn the Volume Control@ Knob on the unit to adjust volume level as
    desire(Or, use the Volume Controls on the Car Radio or paired BT Device
    to adjust volume level).
  • Press the Volume Control,@ Knob to pause press again to resume
    normal playback
  • Press the front and back Buttons to skip tracks

To shut off the unit, unplug the unit from car cigarette lighter socket
NOTE
When the Audio Connection Cable was inserted into the aux jack BT will be cut off automatically. Unplug the cable from the AUX Jack before use BT

BUILT-IN USB CHARGER:
The unit has a built-in USB Charger. Use it to charging the external USD Device as

  1. Connect the unit to the car cigarette lighter socket to power on the unit.
  2. Connect the full size USB Plug of the charging cable from the external USB Device to the usb port
  3. Charging will automatically start. Monitoring the charging status by the Charging Indicators on the external USB Device as usual
  4. When finished charging, disconnect the external USB Device from the USB Port

Blackweb BWB17AV004 FM Transmitter ROUBLESHOOTING

Check the following before requesting service

SYMPTOMPOSSIBLE CAUSEPOSSIBLE SOLUTION
Car radio no soundThe radio frequency between the unit and car radio mismatchFound and set the radio frequency of the Car Radio and unit in the Same frequency
No sound or sound weakVolume of the unit was set to minimum positionincrease the volume by turn the Volume Control/e knob on the unit clockwise
Volume level of paired connected device is in low levelRise the volume level of the paired/connected device
Sound distortionVolume level too highReduce the volume level by turn the Volume Control/Knob on the unit counterclockwise
Volume level of the connected/paired device too highReduce the volume level of the connected/paired device
BT not functioningThe external BT Device had NOT paired to the unitpair the external BT device to the unit as page 4-5
The external BT device too far from the unitplace the external BT device close to the unite
Micro SD Card was inserted into the unitUnplug the card from the unit before BT
Audio Connection Cable was inserted into the AUX JackUnplug the Audio Connection Cable from the aux Jack before use BT

Blackweb BWB17AV004 FM Transmitter SPECIFICATTIONS:

  • Power source: DC—12 or 24 V, 1300 mAh(Max. from car cigarette lighter socket
  • Output from Built-in USB Charger DC—5 V, 2. 1 A(Max
  • FM Transmitting Frequency: 88,1-107.9MHz
  • BT Version: 3.0
  • BT Operation Distance: 32 Feet in open area

PACKAGE INCLUDES – Blackweb BWB17AV004 FM Transmitter

  • 1 x Owner’s Manual
  • 1 x Audio Connection Cables with 3. 5mm Plugs

SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE

FCC NOTICE.
This equipment has been tested and found to comply with the limits for a Class b digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures
Reorient or relocate the receiving antenna

  • Increase the separation between the equipment and receiver
  • Connect the equipment into an outlet on a circuit different from that to which
  • the receiver is connected
  • Consult the dealer or an experienced radio/Tv technician for help

FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the instruction manual. Modifications not
authorized by the manufacturer may void user’s authority to operate this device
FCC RF Radiation Exposure Statement Caution: To maintain compliance with the
FCC/S RF exposure guidelines, place the product at least 20cm from nearby persons

blackweb fm transmitter manual

Blackweb Bluetooth FM Transmitter Instructions

Blackweb FM Transmitter with bluetooth wireless technology manual

How to use a Blackweb Bluetooth FM Transmitter

How to connect Blackweb Bluetooth FM Transmitter