Blackweb BWD19AAS10 Manual Blackweb Bluetooth Party Speaker BWD19AAS10 Manual Blackweb Party Speaker Manual

Blackweb BWD19AAS10 Manual

Blackweb Bluetooth Party Speaker BWD19AAS10 Manual

Blackweb Party Speaker Manual

Model: bWd19AAS10
Ver.01 Rev.01/22/18

Blackweb BWD19AAS10 Package Contents
Main unit x 1
Power cable x 1
Product guide x1
Product guide

Blackweb BWD19AAS10 Speaker Overview

  1. Microphone/Guitar input
  2. Aux input
  3. Microphone/ Guitar volume control
  4. LED Display
  5. Play/Pause
  6. Previous (hold to seek FM station)
  7. Next(hold to seek FM station
  8. Power On / OFF
  9. Source(BT/AUX/FM)
  10. Light mod
  11. USB charging output
  12. Master volume control

Blackweb Bluetooth Party Speaker BWD19AAS10 Pairing

How Do I Connect My Blackweb Party Speaker

  1. Hold Power button to power on the product
  2. The Bluetooth icon in the display will start blinking rapidly
  3. Active the Bluetooth function on your device and search Bluetooth devices, and select “Blackweb Party SPK” to start connecting
  4. Once paired, the Bluetooth icon in the display will turn on steadily, and you will hear “Bluetooth Connected”.
  5. Play music on your device paired and connected with the speaker

  • During music play
  • Turn the right Master volume knob to adjust volume
  • Press Play button to pause or resume music play
  • Press Back and Front to skip to the previous/next song

Notes: This speaker supports automatic connection with a previously paired
device after power-off and power-on again
To pair with a new Bluetooth device or connect a previously paired device, first hold o to disconnect the current Bluetooth device, and then repeat the above step 3

Blackweb BWD19AAS10 AUX

  • Press o to the aux mode then use a 3. 5mm cable(not included)
  • to connect the speaker to another audio source.
  • Play and control music on your audio device and use the volume
  • knob on the speaker to adjust volume if necessary
  • Notes: In AUX mode buttons cant be controlled

Blackweb BWD19AAS10 Microphone

  1. Connect your Microphone(not included )or Guitar(not included) to the MIC/Guitar socket
  2. Play Guitar through the speaker
  3. Sing along with microphone when music played on Bluetooth/AUX/FM Mod
  4. Turn the MIC/ Guitar knob to adjust the Microphone or Guitar volume

Blackweb BWD19AAS10 FM Mode

  1. Press o to the FM Mode
  2. A. Press Previous or Next button repeatedly to tune to a
    station step by step
    B. Hold Previous or Next button to tune to a station automatically.
  3. Turn the right Master volume knob to adjust volume

To program FM radio station

  1. Hold Play / Pause button 2 seconds to search and program available static
  2. LED display will show the program numbers such as: p_1 or p_2..p_10(max)
  3. Tune to a station with Previous or Next button, and number to it. When successfully, the LED display will show “save”
  4. Short press Play/Pause Button to select the corresponding station in your program list

Notes: The speaker will remember the last station it was on and start at that
station when powered off and on again

Blackweb BWD19AAS10 Light Mode

  1. Hold &- to turn on/turn off the light mode
  2. Short press o- repeatedly to select 5 available display modes

Blackweb BWD19AAS10 USB Cable


  • Connect your device’s charging cable through the 5V 1A charging socket to
  • charge it. USB charging only functions when the unit’s power if turned on

Notes: To charge smartphones and tablets faster, put the device’s screen to sleep

Blackweb BWD19AAS10 Charging

  • Insert the included power cable to charge the unit. The charging icon will be on in the display when charging
  • Notes: The unit can be used with the power cable while it simultaneously
    charges the battery.
  • When four charging indicators light up, indicates that the battery is fully charged.
  • When the red indictor flashes it indicates that the battery is low and needs to be recharged


Disconnect power cord before servicing
replace critical components equivalents
only with factory parts or recommended
For AC line powered units-Before returning repaired unit to user, use an ohmmeter to measure from both AC plug blades to all exposed metal parts. The resistance should be ore than 2,000,000 ohms


DANGEROUR VOLTAGE: triangle is intended to alert the user to the presence of un-Insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock


  1. Read these instruction
  2. Keep these instructions
  3. Heed all warnings
  4. Follow all Instructions
  5. Do not use this apparatus near water
  6. Clean only with dry cloth
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instruction
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat
  9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. a grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety
    If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet
  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus
  11. Only use attachment/accessories specified by the manufacturer
  12. Use only the cart, stand, tripod, bracket or table specified by the
    manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over
  13. Unplug this apparatus during lightning storms or when unused for
    long periods of time
  14. Refer all servicing to qualified service personnel. Servicing is required
    when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped
  15. Power Sources- This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit
  1. Water and moisture -This product should be kept away from direct contact with liquids. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus
  2. CAUTION-Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type Batteries(a battery pack or an installed battery) shall not be exposes same excessive heat such as sunshine fire etc.
  3. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable
  4. This symbol means the equipment is a Class l or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth
  5. Do not install this equipment in a confined or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths curtains etc
  6. This apparatus is for professional use only
  7. When moving or not using the appliance, secure the power cord (e. g, wrap it with a cable tie). Be careful not to damage the power cord Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a lalified service technician for repair or replacement as specified by the manufacturer
  8. WARNING: Please refer to any important information(e.g, electrical, safety, etc. ) printed on the exterior side enclosure before installing or operating the product
    WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The use of apparatus in moderate climates No naked flame sources, such as lighted candles, should be placed on the apparatus; Minimum distances 5cm around the apparatus for sufficient ventilation; To preserve our environment, dispose of used batteries according to your local laws or regulations


1 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment

2. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to
  • which the receiver is connected
  • Consult the dealer or an experienced radio/v technician for help

3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause
undesired operation

4 RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna
Product for Wal-Mart Stores In Bentonville, ar72716, Hotline 1-800-925-6278

How do I reset my Blackweb Bluetooth party speaker?

blackweb speaker model bwd19aas10

blackweb model bwd19aas10

Blackweb BWD19AAS10 Battery replacement

blackweb BWD19AAS10 bluetooth party speaker manual